 The
ESH 0441 is a mobile 4 post lift which can be
operated as a single,
double or 4 post lift.
By using single posts the height is to limit at a
height of 1000 mm you can
lift vehicles with a weight up to 2,5 t a very
ergonomic working height,
especially for body repair and car painting like
the established Profimaster 3000.
By using 2 ESH 0441 columns you can lift cars up
to 3,5 t on the front or
rear axle. Especially at commercial vans it is
possible to lift at the axle to
a very usefull height of about 1500 mm. Workings
at the axles, at the
engine and at the gear box can be done at a
ergonomical working height.
The columns can be lifted synchron by using the
power unit for 2 or 4
columns, but also you can drive each columns
individually.
By using 4 columns you can lift up cars up to a
weight to 3.5 t totally.
The great lifting stroke from 1800 mm brings you
an effective working
height underneath the car from 2000 mm. That means
it is a very high
and comfortable working height also for very tall
users.
By using axlestands you can support the complete
car or only one tyre, or axle, to work wheelfree
especially for brakeservice etc.
The driving mechanism is electromechanical. The
lifting spindle is rolled and the lifting nut and
security nut are made by a special high quality
bronce material. The columns are made in
lightweight construction and very easy to move
with 2 fixed and 2 turnable wheels under the
groundframe. To use one or two columns of the ESH
0441you need only single phase 230 V.
Only by using them as a set of four columns with
synchronisation power unit you need 400 V, 32 A. |
