Winchester Gages

Wheel & Coupler Gages

Winchester Industries, Inc. located in Winsted, Connecticut, in the United States was founded in 1982 by John C. Devanney. For over 30 years, we have manufactured various gages for the railroad industry.

After starting with just a few products, we currently manufacture and re-certify thousands of different railroad related gaging products, with a primary focus on wheels and couplers.

 

We are currently the only manufacturer of wheel gages that is M-1003 certified by the AAR.

Over the years, we have supplied gages to some of the world’s largest rail companies including:

  • Indonesian Railway
  • Burlington Northern
  • Sante Fe Railroad (BNSF)
  • Union Pacific
  • Canadian National
  • Canadian Pacific
  • Amtrak
  • Norfolk Southern
  • GBW Railcar Services (formerly Watco and Greenbrier)
  • Ferromex
  • Amsted Maxion
  • Genesee & Wyoming
  • Bombardier
  • Alstom Transportation Services

 

Manual: STEEL WHEEL GAGE W601A (Bahasa Indonesia)

 

Full Gage Ranges

Click on GAGE Number to see drawing.

GAGE NO. REV DESCRIPTION
W1 A ALMOST UNIVERSAL GAGE POUCH
W2 A WINCHESTER BALL CAP
1-8983   1-8983 THIS GAGE NOT REQUIRED SEE LARRY DAVIS LETTER IN M-214 SECTION OF WEBSITE
W201A B STEEL WHEEL GAGE STANDARD S-630-98 (MODIFIED)
TO PROVIDE CLEARANCE FOR DISC BRAKES
W201-1A A STEEL WHEEL GAGE STANDARD S-630-98 (MODIFIED)
TO PROVIDE CLEARANCE FOR DISC BRAKES
LESS CLEARANCE THAN PROVIDED BY W201A
W205-2 F DIRECT READING STEEL WHEEL GAGE
NORFOLK SOUTHERN DRAWING 52-C-112 REV A
MODIFIED BY WINCHESTER FOR FUNCTION
W206 A DRAFT POCKET GAGE  (24 5/8″)
W209 B STEEL WHEEL GAGE STANDARD S-630-98
MODIFIED FOR VIA RAIL
W211 E THRUST LUG HEIGHT GAGE EC-1091
MSRP D RP-321-91
W212 E PEDESTAL THRUST  LUG GAGE
MSRP D RP-321-91 TTX B-7046
W236 C SWIVEL BUTT COUPLER REAR WALL GAGE
AAR FIELD MANUAL RULE 17 & RULE 18
W245 D COUPLER REAR WALL KEY SLOT
AAR FIELD MANUAL RULE 16
W275 B SIMPLIFIED STEEL WHEEL GAGE (MODIFIED)
UNION PACIFIC RR SPECIFICATION
W286 A PIN HOLE GAGE
ATCHINSON TOPEKA & SANTA FE RAILWAY  DRAWING 2-A-59-104447
W287 A TRUCK SPRING LIMIT WEAR GAGE
UNION PACIFIC SPECIFICATION FOR AAR FIELD MANUAL RULE 50
W288   HITCH PLUNGER INSPECTION GAGE
TTX DRAWING B-1033 REV E
W290 B SETUP AND INSPECTION GAGE FOR STUCKI CONSTANT CONTACT SIDE
BEARINGS
W291 C SIMPLIFIED TRAINLINE GLADHAND GO/NO-GO GAGE
W300 A LIMIT WEAR GAGE FOR CHECKING MAXIMUM FLANGE THICKNESS, HEIGHT AND THROAT RADII FOR UNI-POINT WHEEL (FT-2335)
W301 A MAXIMUM FLANGE THICKNESS, HEIGHT & THROAT RADII GAGE FOR UNI-POINT STEEL WHEELS (FT-2335)
W302 A MINIMUM FLANGE THICKNESS, HEIGHT & THROAT RADII GAGE FOR UNI-POINT STEEL WHEELS (FT-2335)
W303 A LIMIT WEAR GAGE FOR CHECKING MINIMUM FLANGE THICKNESS,
HEIGHT AND THROAT RADII FOR UNI-POINT STEEL WHEEL (FT-2335)
W304 C MASTER GAGE FOR VERIFYING W635 (44057)
W305 B MASTER GAGE FOR VERIFYING W636 (49822)
W306 C MASTER GAGE FOR VERIFYING W676 (25623-1
W307 B MASTER GAGE FOR VERIFYING W681  (47120-2)
W308 C MASTER GAGE 35792-2 FOR VERIFYING W602 (28393)
W309 B MASTER GAGE FOR W750 (32600)
CANADIAN PACIFIC DRAWING 60-C-343
W315 A G.E. RAILCAR REPAIR GAGE FOR MEASURING COMBINED WEAR ON RIDE CONTROL FRICTION SHOES
W316 B NARROW FLANGE 1B LOCOMOTIVE PROFILE WIDTH
GO/NO-GO GAGE
W319-1 A WHEEL DIAMETER GAGE
W319-2 C WHEEL DIAMETER GAGE MODIFIED FOR CANADIAN NATIONAL RR
W323 A 1.25 INCH FILLET GAGE
W323-1 A MASTER GAGE FOR 1.25 INCH FILLET GAGE (W323)
W323-2 A 3 INCH FILLET GAGE
W323-3 A 4.5 INCH FILLET GAGE
W323-4 A 1.00 INCH FILLET GAGE
W323-5 A MASTER GAGE FOR 1″ FILLET GAGE
W323-6 A MASTER GAGE FOR 3″ RADIUS GAGE
W324 A KEYSTONE INSPECTION AND MAINTENANCE PROCEDURE
DRAWING 2-C-4915  GAGE NUMBER 4915
W343 A MASTER GAGE FOR BACK TO BACK MOUNTING GAGE   W783
W343-1 A STANDARD FOR “U” DIMENSION GAGES
W344 A GAUGE #3 TO BE USED FOR CONDEMNING SIDE SPRINGS
W356 E WHEEL DIAMETER GAGE (40, 42, 45 INCH DIAMETER WHEELS)
W365 A SIDE FRAME CEILING WEAR GAGE
CSX SPECIAL GAGE NO. TRK-SF-PED
W366-1 B C PEP GAGE
STANDARD CAR TRUCK CO. DRAWING SK-1655
W366-2 B SIDE BEARING LOCATION GAGE
W368 C THRUST LUG NO-GO GAGE WITH HANDLE CIRCULAR LETTER C-10391 AND
C-10441
W374 A BARBER/SMT-BOLSTER POCKET WIDTH GAGE
TTX DRAWING B-10861 REV C
W375-1 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-2 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-3 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-4 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-5 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-6 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-7 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
70 & 100 TON RIDE CONTROL TRUCK
W375-8 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
SUPER SERVICE RIDE CONTROL TRUCK
W375-9 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-10 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W375-11 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
125 TON RIDE CONTROL D3 SPRINGS
W375-12 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
70 & 100 TON RIDE MASTER
W375-13 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
70 & 100 TON RIDE MASTER WITH 1992 SLOPEGUARD SHOES
W375-14 A TRUCK TEAR DOWN LIMITS
BNSF “GO – NO GO” FRICTION CASTING SHOE GAGE
W380 A DISC THICKNESS GAGE
W388 F SPALL GAGE, BRAKE GAGE, COUPLER GAGE, SAFETY ACCEPTANCE GAGE, SLID FLAT GAGE & SHELL TREAD GAGE
W392 A BRAKE ROD WEAR GAGE
CANADIAN NATIONAL RAILWAY
W401 F TREAD WORN HOLLOW GAGE
W401D6 B FOUR (4) STANDARD FOR TREAD WORN HOLLOW GAGE (W401)
W403-1 B SPLIT WEDGE CONDEMNING GAGE  SK-2046    905-SW  915-SW  925-SW  955-SW
STANDARD CAR TRUCK DRAWING SK-2046 REV B
W403-2 A SPLIT WEDGE CONDEMNING GAGE  SK-2063     945-SW   965-SW
W404-1 C SPLIT WEDGE CONDEMNING GAGE  SK-2050     915-SW
W404-2 C SPLIT WEDGE CONDEMNING GAGE  SK-2045     925-SW
W404-3 C SPLIT WEDGE CONDEMNING GAGE  SK-2054     905-SW
W404-4 C SPLIT WEDGE CONDEMNING GAGE  SK-2058     955-SW
W404-5 C SPLIT WEDGE CONDEMNING GAGE  SK-2062     945-SW
W404-6 C SPLIT WEDGE CONDEMNING GAGE  SK-2270     965-SW
W407 B CENTERING GAGE 945-SW INSERT
STANDARD CAR TRUCK COMPANY DRAWING SK-2041 A
W408 B ELEVATION GAGE 945-SW INSERT
STANDARD CAR TRUCK DRAWING SK-2042 REV B
W410 A HANGERLESS BRAKE BEAM GAGE  Standard S-360-79
W421 B DRAFT GEAR POCKET GAGE
CANADIAN NATIONAL RR DRAWING 1tC-3298-A REV A
W425-1 A NOZZLE FLANGE GASKET GROOVE GAGE
UNION TANK CAR CO.  DRAWING A-94-73
W425-2 A SILVER DOLLAR GASKET TONGUE GAGE
UNION TANK CAR CO. DRAWING A-94-73
W426 B DIESEL AXLE WHEEL SEAT TO GEAR MAX DIMENSION
CANADIAN NATIONAL DRAWING 3TM-4544-A REV A
W427 A NATIONAL ARTICULATING CONNECTOR TEMPLATE FOR MODIFYING
PRE-92 MALE CONNECTOR PULL STOPS TO CURRENT DESIGN
ABC NACO DRAWING 53169
W428 B ARTICULATED CONNECTOR GAGE
TTX DRAWING D-11602 REV E
W429 A ELEVATION GAGE 965-SW INSERT
STANDARD CAR TRUCK COMPANY DRAWING SK-2165
W432 A SIDE BEARING CLEARANCE GAGE
UNION PACIFIC RAILROAD SPECIFICATION
W435 A XC-R BOLSTER GAGE 6 1/2 X 12
W437 A TRIPPER GAGE
PORT AUTHORITY TRANS-HUDSON CORP DRAWING SKMOO-12
W439 A NATIONAL A-P TIGHTLOCK COUPLER ALIGNING WING LIMIT GAGE
ABC-NACO DRAWING 53255  GAGE NUMBER 53255-1
W440 A NATIONAL A-P COUPLER KNUCKLE NOSE WEAR AND STRETCH LIMIT GAGE
ABC-NACO DRAWING 53253 GAGE NUMBER 53253-1
W441 A 133LB RAIL D-BAR PROFILE GAGE
W442 A 136LB RAIL D-BAR PROFILE GAGE
W446 A INDUSTRIAL EQUIPMENT WILLISON AUTOMATIC COUPLER GAGE CONTOUR HEAD AND LOCK CONDEMNING LIMIT
ABC-NACO DRAWING 47419 REV A  GAGE NUMBER 47419-1
W449 A BOMBARDIER STEEL WHEEL GAGE DRAWING BSK-12053-1
FOR PROFILE 414-9NW1  KUALA LUMPUR
W450 A GAGE NO. 2 FOR SELECTION OF SECOND HAND SPRINGS
CANADIAN NATIONAL RR DRAWING 3H-34858
W451 B BARBER 905-SW SPLIT WEDGE ELEVATION GAGE
STANDARD CAR TRUCK DRAWING SK-1776 REV B
W452 B BARBER 905-SW SPLIT WEDGE INSERT CENTERING GAGE
STANDARD CAR TRUCK DRAWING SK-1777 REV B
W455 A WHEEL DIAMETER GAGE
W456-1 A NORFOLK SOUTHERN CENTER PLATE RECONDITIONED GAGE 14 INCH
W456-2 A NORFOLK SOUTHERN CENTER PLATE RECONDITIONED GAGE 16 INCH
W457-1 D SLOPE TEMPLATE
SPLIT WEDGE TRUCK DROP-IN WORN POCKET ACCEPTANCE GAGE
PENNSY DRAWING IN 2234
W457-2 B POCKET WIDTH TEMPLATE
SPLIT WEDGE TRUCK DROP-IN WORN POCKET ACCEPTANCE GAGE
PENNSY DRAWING PN 2048
W459 A NATIONAL ARTICULATED CONNECTION RECONDITIONING OF PULL STOP SURFACE OF MALE CONNECTORS
ABC-NACO DRAWING 52734  GAGE NUMBER 52734-1
W462 A INSPECTION/MAINTENANCE NATIONAL ARTICULATED CONNECTION
BUSHING WEAR GAGE
ABC-NACO DRAWING 52659
W463 A SELF-CENTERING SURFACE GAGE (3 7/8 RADIUS) & (4 1/8 RADIUS)
LEWIS BOLT & NUT COMPANY DRAWING HXTW8-SJ3
W467-1 B TALGO BRAKE PAD GAGE (.250 INCHES)
W467-2 B TALGO BRAKE PAD GAGE (.335 INCHES)
W469 A NO GO GAGE FOR BRAKE SHOE  STANDARD S-362-79
W470 A GO GAGE FOR BRAKE SHOE  STANDARD S-361-78
W471 A SIDE FRAME COLUMN GAGE
SUPER SERVICE RIDEMASTER®  ASF® DRAWING 1-9211
W472 A POCKET CONSTRUCTION POINT GAGE
SUPER SERVICE RIDEMASTER®  BOLSTER  ASF®  DRAWING 1-9203
W473 A GAGE FOR BOLSTER GIB RESTORATION
SUPER SERVICE RIDEMASTER®  BOLSTER
AMERICAN STEEL FOUNDRIES  DRAWING 1-9205
W474 A COLUMN OUTER LAND SURFACE GAGE
SUPER SERVICE RIDEMASTER® BOLSTER
AMERICAN STEEL FOUNDRIES DRAWING 1-9206
W475 A OUTER GIB CONTOUR GAGE
SUPER SERVICE RIDEMASTER® BOLSTER
AMERICAN STEEL FOUNDRIES DRAWING 1-9209
W476 A COLUMN INNER LAND SURFACE GAGE
SUPER SERVICE RIDEMASTER®  BOLSTER
AMERICAN STEEL FOUNDRIES DRAWING 1-9207
W477 A POCKET EXTENSION AND POCKET INSERT GAGE
STANDARD CAR TRUCK DRAWING SK-2670 REV NONE
W478 A POCKET INSERT CONDEMNING GAGE 905-SW SPLIT WEDGE
STANDARD CAR TRUCK COMPANY DRAWING SK-2056 REV NONE
W480 B 37 1/2 DEGREE SURFACE CONTOUR GAGE
SUPER SERVICE RIDE MASTER BOLSTER
AMERICAN STEEL FOUNDRIES DRAWING 1-9201
W481 B M-7 WHEEL DIAMETER GAGE
LONG ISLAND RAILROAD
W491 A SPLIT WEDGE HCX BOLSTER POCKET RESTORATION GAGE
PENNSY DRAWING PN 2128
W500 A AXLE FILLET GAGE FOR CHECKING FILLET UNDERCUTS
W505 A POCKET INSERT CONDEMNING GAGE 945-SW SPLIT WEDGE
BARBER ®DRAWING SK-2065
W506-1 A SIDEWALL RESTORATION GAGE (LOWER RESTORATION)
BARBER®  DRAWING SK-2044 REV B
W506-2 A SIDEWALL RESTORATION GAGE (UPPER RESTORATION)
BARBER®  DRAWING SK-2044 REV B
W507 B GIB RESTORATION GAGE S-2-E
BARBER®  DRAWING SK-2264 REV A
W508 A SIDE FRAME COLUMN REPAIR GAGE FOR S-2-E
BARBER®  DRAWING SK-2265
W510 A BUTT WIDTH GAGE No. 50052-2
MCSCM DRAWING 50052 REV A
W519 A SPLIT WEDGE BOLSTER POCKET RESTORATION GAGE
PENNSY DRAWING PN 1504
W520 A REDUCED SIZE WILLISON AUTOMATIC COUPLER GAGE
CONTOUR HEAD AND LOCK CONDEMNING LIMIT
NATIONAL CASTINGS DRAWING 49554  GAGE 49554-1
W521 A UPPER & LOWER SIDE WALL RESTORATION GAGES S-2-M
STANDARD CAR TRUCK DRAWING SK-2504 PRELIMINARY RELEASE
W522 A BARBER BOLSTER GIB RESTORATION GAGE S-2-M
STANDARD CAR TRUCK DRAWING SK-2505 PRELIMINARY RELEASE
W523 A REPAIR GAGE FOR S-2-M SIDE FRAME COLUMNS
STANDARD CAR TRUCK DRAWING SK-2506 PRELIMINARY RELEASE
W524 A MODIFIED TTX EARLY REMOVAL GAGE
TTX DRAWING C-10778 REV D MODIFIED BY WINCHESTER
W529 A CONDEMNING GAGE POCKET INSERT  915-SW SPLIT WEDGE
STANDARD CAR TRUCK DRAWING SK-2052
W530 C SIDEWALL RESTORATION GAGES  STRAIGHT WALL APPLICATION
STANDARD CAR TRUCK DRAWING SK-2546 REV B
SUPERSEDES SK-2142 (W991)
W531 A HITCH “D” BUSHING-HOOK HOLD DOWN NO-GO GAGE APPLIES TO ACF MODEL 5
TTX DRAWING A-2266 REV D
W533 B ELEVATION GAGE 925-SW INSERT
STANDARD CAR TRUCK DRAWING SK-2573 REV NONE
W534 A REPAIR GAGE FOR S-2-C  5 1/2 X 10 SIDE FRAME COLUMNS FOR SPLIT WEDGE
STANDARD CAR TRUCK DRAWING SK-2575 REV NONE
W535 A STABILIZER WEAR GAGE
STANDARD CAR TRUCK DRAWING SK-2576 REV NONE
W536 A BOLSTER INNER GIB GAGE SUPER SERVICE RIDEMASTER BOLSTER
AMERICAN STEEL FOUNDRIES DRAWING 1-9223
W537 A REPAIR GAGE FOR S-2-E   6 1/2 X 12 SIDE FRAME COLUMNS
STANDARD CAR TRUCK DRAWING SK-2548
W538 A REPAIR GAGE FOR S-2-E   6 1/2 X 12 SIDE FRAME COLUMNS
STANDARD CAR TRUCK DRAWING SK-2524
W539 A SLOPEWALL RESTORATION GAGE  S-2-E BARBER STABILIZED TRUCKS
STANDARD CAR TRUCK DRAWING SK-2527 REV NONE
W548 A TF-880 HOUSING TAPERED BORE GAGE
A. STUCKI COMPANY DRAWING 07494
W549 A THRUST LUG GAGE FOR 6 1/2 X 9 & 6 1/2 X 12 NARROW PEDESTAL
S-286 / M-976 RETROFIT
ASF – KEYSTONE, INC. DRAWING 1-9270 REV C
W549-1 B THRUST LUG GAGE FOR 6 X 11 M-976 RETOFIT
W550 A BOMBARDIER STEEL WHEEL GAGE
DRAWING NUMBER BSK-12627-1
W550-1 A BOMBARDIER STEEL WHEEL GAGE
DRAWING BSK-13316-1
W555 A BEARING SEAT LOCATION AND JOURNAL FILLET GAGE  L JOURNAL 6 X 8
TTX COMPONENT SPECIFICATION 68-92-020805
W556 A BEARING SEAT LOCATION AND JOURNAL FILLET GAGE  M JOURNAL 7 X 9
TTX COMPONENT SPECIFICATION 68-92-020805
W557 A SIDEWALL RESTORATION GAGES ANGLED WALL APPLICATION
STANDARD CAR TRUCK DRAWING SK-2547
W558 A ASK-SUPER SERVICE RIDEMASTER SIDE FRAME COLUMN SPACING & ALIGNMENT GO GAGE 100/110 TON CAPACITY  ASF DRAWING 1-9212
W559 A ASK-SUPER SERVICE RIDEMASTER SIDE FRAME COLUMN SPACING & ALIGNMENT NO-GO GAGE 100/110 TON CAPACITY ASF DRAWING 1-9213
W561-1 A FRICTION CASTING GAGE FOR 609-D
STANDARD CAR TRUCK DRAWING SK-766 REV G
W561-2 A FRICTION CASTING CAGE  FOR 678-C & 787-C
STANDARD CAR TRUCK DRAWING SK-766 SHEET 2 REV D
W561-3 A FRICTION CASTING GAGE FOR 678-B & 787-B
W563 A CONDEMNING GAGE POCKET INSERT 925-SW SPLIT WEDGE
STANDARD CAR TRUCK DRAWING SK-2048 REV NONE
W565 B GAGE 41897
W567 A THRUST LUG WIDTH GO GAGE FOR ROADMASTER RETRO-FIT PEDESTAL SIDE FRAME AMERICAN STEEL FOUNDRIES DRAWING 99207 REV A
W568 A GO AND NO-GO GAGE NARROW PEDESTAL 100 TON SIDE FRAME
AMERICAN STEEL FOUNDRIES DRAWING 97707 REV L
W569 A SIDE BEARING BASE WIDTH GAGE 3800LT, 4500LT, 5600LT
AMERICAN STEEL FOUNDRY DRAWING 1-9271 REV A
W570 A SIDE BEARING BASE AND CAP WALL THICKNESS GAGE 3800LT, 45000LT, 5600LT
AMERICAN STEEL FOUNDRIES DRAWING 1-9272 REV A
W571 A RAIL GRIND GAGE
W571-1 A RAIL GRIND GAGE PINWHEEL
W572-1 D MBTA WHEEL GAGE
W573 A AXLE OVERALL LENGTH GAGE
AAR MRSP G-II FIGURE 4.2
W576 D JOURNAL W DIMENSION GAGE
AAR G-II Fig.4.4 & 4.1
W579 B POCKET WIDTH GAGE SIDE WALL WEAR PLATE RETROFIT
STANDARD CAR CO DRAWING SK-2848 REV A
W580 A POCKET WIDTH GO & NO GO GAGE S-2-C WITH SIDE WALL WEAR PLATES
STANDARD CAR TRUCK CO DRAWING SK-2852 REV NONE
W581 A POCKET WIDTH GO & NO GO GAGE S-2-HD & S-2-HD-9C WITH SIDE WALL WEAR PLATES  STANDARD CAR TRUCK CO DRAWING SK-2853 REV NONE
W582 A GIB RESTORATION GAGE BARBER STABILIZED TRUCK S-2-HD & S-2-HD-9C
STANDARD CAR TRUCK CO DRAWING SK-2480 REV A
W584 A SLOPE SURFACE CONSTRUCTION GAGE “AS CAST” BOLSTER POCKETS
STANDARD CAR TRUCK CO DRAWING SK-2855 REV NONE
W594 A GIB HEIGHT GAGE “AS CAST” BOLSTER POCKET RC SPLIT WEDGE TRUCK
STANDARD CAR TRUCK CO. DRAWING SK-2859 REV NONE
W595 A SLOPE SURFACE CONSTRUCTION GAGE AS CAST BOLSTER POCKETS RC SPLIT WEDGE TRUCKS STANDARD CAR TRUCK CO DRAWING SK-2860 REV NONE
W598 B COMBINED TRUCK WEAR GAGE
70 TON LOW LEVEL 5’3″ WHEELBASE
ASF®  MAINTENANCE MANUAL RC 8  2-8510 LINE 3
W599 B COMBINED TRUCK WEAR GAGE
70 TON LOW LEVEL 5’1″ WHEELBASE
ASF®  MAINTENANCE MANUAL RC 8  2-8510 LINE 4
W600A B STEEL WHEEL GAGE  (NF ONLY)  STANDARD S-630-98
W600-1A B LOCOMOTIVE STEEL WHEEL GAGE (FLANGE THICKNESS IN 1/16″)
W600-2A A LOCOMOTIVE STEEL WHEEL GAGE (FLANGE THICKNESS IN 1/16″)MODIFIED TO MEASURE OVERSIZED LOCOMOTIVE WHEELS
W600-3A A SEPTA STEEL WHEEL GAGE FOR M-4 CONTOUR
W600-4A C SAN DIEGO TROLLEY WHEEL GAGE FOR TIRE RW-6091-T-SLC/D
PENN MACHINE DRAWING RW-6091-T-SLC/D
W600-5A A STEEL WHEEL GAGE (NF) MODIFIED FOR 14 & 16 INCH DIAMETER WHEELS
W600-6A A STEEL WHEEL GAGE (NF) MODIFIED TO MEASURE POSITIVE FLANGE THICKNESS
W600-7A A SAN DIEGO TROLLEY WHEEL GAGE FOR TIRE PM-10892-T SAN DIEGO /S70 TIRE
PENN MACHINE DRAWING PM-10892-T
W600-9A C SEPTA WHEEL GAGE M4 1B
SEPTA DRAWING D-5828 REV D
W601A D STEEL WHEEL GAGE (NF & WF)    STANDARD S-630-98
W601-1A B STEEL WHEEL GAGE (NF & WF)   STANDARD S-630-98MODIFIED TO MEASURE OVERSIZED LOCOMOTIVE WHEELSGENERAL MOTORS EMD PART NUMBER 40085351
W601-2A A STEEL WHEEL GAGE (NF & WF)  STANDARD S-630-98RIM THICKNESS READS LIKE A REGULAR SCALE (NOT 1/16THS)
W601-3A A STEEL WHEEL GAGE (NF & WF)  STANDARD S-630-98RIM THICKNESS READS LIKE A REGULAR SCALE (NOT 1/16THS)MODIFIED TO MEASURE OVERSIZED LOCOMOTIVE WHEELS
W601-4A A AMTRAK STEEL WHEEL GAGE #1
W602 B E-COUPLER RECONDITIONED GAGERULE ONE GAGE   28393
W611 B SEAT LOCATION AND JOURNAL FILLET GAGE  FREIGHT AXLES K (6 1/2 X 9)AAR G-II  Figure 5.18
W612 A SEAT LOCATION AND JOURNAL FILLET GAGE  FREIGHT AXLES D (5 1/2 X 10)AAR G-II  Figure 5.18
W613 A SEAT LOCATION AND JOURNAL FILLET GAGE  FREIGHT AXLES E ( 6 X 11)AAR G-II  Figure 5.18
W614 A SEAT LOCATION AND JOURNAL FILLET GAGE  FREIGHT AXLES F (6 1/2 X 12)AAR G-II  Figure 5.18
W615 A SEAT LOCATION AND JOURNAL FILLET GAGE  FREIGHT AXLES G (7 X 12)AAR G-II  Figure 5.18
W616 A SEAT LOCATION AND JOURNAL FILLET GAGE  AMTRAK AXLES D (5 1/2 X 10)AAR G-II  Figure 5.18
W617 A SEAT LOCATION AND JOURNAL FILLET GAGE  AMTRAK AXLES E (6 X 11)AAR G-II  Figure 5.18
W618 A SEAT LOCATION AND JOURNAL FILLET GAGE  AMTRAK AXLES F ( 6 1/2 X 12)
AAR G-II  Figure 5.18
W619 A AXLE FILLET GAGE   G-II Figure 4.11
W620 D SIMPLIFIED WHEEL GAGE  AAR  MSRP  G  MANUAL  RP-615-77
W620-1P E IMPROVED COMBINED WHEEL GAGE AAR MSRP G Standard S-628
W620-2P E IMPROVED COMBINED WHEEL GAGE AAR MSRP G Standard S-627
W620-3 E AMTRAK INTERMEDIATE INSPECTION GAGE #1
W620-4 C AMTRAK INITIAL TERMINAL INSPECTION GAGE #1
W620-5 A NEC-MSC WHEEL GAGE
W620-6 A COMBINED WHEEL GAGE MODIFIED FOR 14 & 16 INCH DIAMETER WHEELS
W620-7 A DAILY WHEEL INSPECTION GAGE  TALGO, INC.
W620-9 A MBTA COMBINED WHEEL GAGE
W620-11 A SIMPLIFIED WHEEL GAGE AAR MSRP G MANUAL RP-615-77
MODIFIED FLANGE CONDEMNING HEIGHT 1.438″
W620-13 A IMPROVED COMBINED WHEEL GAGE AAR MSRP G Standard S-628 (MM SCALE)
W622 C AXLE CENTERING GAGE  MSRP G M-101; GII RP-634
W623 C WIDE FLANGE CONTOUR  (FEMALE)  1 IN 20 TAPERStandard  1978  (For Contour prior to 1B)
W627-1 D IMPROVED WHEEL DEFECT GAGE ( 7/8 & 15/16)
W627-2 D IMPROVED WHEEL DEFECT GAGE ( 1 & 15/16)
W627-3 A UNION PACIFIC LOCOMOTIVE WHEEL DEFECT GAGE
W627-4 A IMPROVED WHEEL DEFECT GAGE ( 7/8 & 1)
W628 C TREAD WORN HOLLOW CONDEMNING GAGE WITH SHIM
W630 A MIN FLANGE THICKNESS HEIGHT & THROAT RADIUS GAGEFor Narrow Flange Wheels Standard S-603-72  (For Contour prior to 1B)
W632 A MIN FLANGE THICKNESS HEIGHT & THROAT RADIUS GAGEFor Wide Flange Wheels Standard S-607-72  (For Contour prior to 1B)
W633 A MAX FLANGE THICKNESS HEIGHT & THROAT RADIUS GAGEFor Wide Flange Wheels Standard S-605-71  (For Contour prior to 1B)
W635 A E-COUPLER NOSE WORN LIMIT GAGE  # 44057
W636 A F-COUPLER KNUCKLE NOSE WORN LIMIT GAGE # 49822
W637 D ADAPTER WEAR GAGE  FIELD MANUAL RULE 37
W637-1 A ADAPTER WEAR GAGE
STANDARD CAR TRUCK COMPANY DRAWING SK-3120 NO REVISION
W638 B F-KNUCKLE WEAR & STRETCH GAGE # 44250-3
W639 C SECOND HAND & RECONDITIONED ACCEPTANCE GAGE #44250-5
NATIONAL A-P TIGHTLOCK COUPLER CONDEMNING LIMIT ALIGNING WING POCKET AND GUARD ARM – VERTICAL HEIGHT
ABC-NACO DRAWING 53254 GAGE NUMBER 53254-1
W640 C AAR STANDARD F AND TIGHTLOCK COUPLERS MAINTENANCE & SECOND HAND GAGE # 34101-4
W641 D F-COUPLER GUARD ARM DISTORTION GAGE  #36527-2A
W642 B COUPLER COMMITTEE  GAGE 49354
W643 B RECOMMENDED PRACTICE RP-602-58 (For Contour prior to 1B)
W644 B RECOMMENDED PRACTICE RP-603-73 (For Contour prior to 1B)
W645 B LIMIT WEAR GAGE STANDARD S-606-71 (For Contour prior to 1B)
W646 B LIMIT WEAR  GAGE STANDARD S-608-72 (For Contour prior to 1B)
W648 A MIN MASTER GAGE  RECOMMENDED PRACTICE  RP-605-71(For Contour prior to 1B)
W649 A MAX  MASTER  GAGE  RECOMMENDED PRACTICE  RP-606-72(For Contour prior to 1B)
W650 B MIN MASTER GAGE  RECOMMENDED PRACTICE  RP-607-72(For Contour prior to 1B)
W651 A MAX & MIN LIMIT GAGE  STANDARD S-604-72(For Contour prior to 1B)
W652 A E & F  COUPLER  RECONDITIONED  ACCEPTANCE  GAGE   #51236
W653 A YOKE HEAD THICKNESS RECONDITIONED ACCEPTANCE GAGEFOR BUSHING APPLICATION  GAGE # 44246-6
W654 A VERTICAL PIN CONNECTION YOKE RECONDITIONED GAGE FORHEAD THICKNESS WITHOUT BUSHING  GAGE NO. 44246-3
W657 A MAX  MASTER  GAGE  RECOMMENDED PRACTICE  RP-604-71(For Contour prior to 1B)
W658 D NARROW FLANGE CONTOUR (MALE)  1 IN 40 TAPER FOR AMTRAKFLANGE PER STANDARDS  S-622-78 & S-623-58
W659 C NARROW FLANGE CONTOUR (FEMALE)  1 IN 40 TAPERFOR AMTRAK  FLANGE PER STANDARDS  S-622-78 & S-623-58
W659-1 B AMTRAK WHEEL PROFILE ACCEPTANCE GAGE 1 IN 40 TREAD TAPER AND FLANGE CONTOUR PER STANDARD S-622-78 & S-623-58 GAGE DRAWN TO VERIFY CONTOURS SAME AS AAR MSRP G-II Figure 4.310
W659-2 A PASSENGER WHEEL CONTOUR ACCEPTANCE GAGE
W660 C AAR  1B  WIDE  FLANGE CONTOUR GAGE (MALE)1 IN 20 TAPER  MSRP G Figure 11
W661 B MAX FLANGE THICKNESS GAGE FOR AAR  1B  WIDE FLANGESTANDARD S-665-91
W662 B LIMIT WEAR GAGE MAX FLANGE THICKNESS AAR 1B  WIDEFLANGE CONTOUR  STANDARD S-666-91
W663 B MIN FLANGE THICKNESS GAGE FOR AAR  1B  WIDE FLANGESTANDARD S-667-91
W664 B LIMIT WEAR GAGE MIN FLANGE THICKNESS AAR 1B  WIDEFLANGE CONTOUR  STANDARD S-668-91
W665 B MAX FLANGE THICKNESS GAGE FOR AAR  1B  NARROW  FLANGESTANDARD S-661-91
W666 B LIMIT WEAR GAGE MAX FLANGE THICKNESS AAR 1B  NARROWFLANGE CONTOUR  STANDARD S-663-91
W667 B MIN FLANGE THICKNESS GAGE FOR AAR  1B  NARROW  FLANGESTANDARD S-662-91
W668 B LIMIT WEAR GAGE MIN FLANGE THICKNESS AAR 1B  NARROWFLANGE CONTOUR  STANDARD S-664-91
W669 D AAR  1B  WIDE  FLANGE CONTOUR GAGE (FEMALE)1 IN 20 TAPER  MSRP G Figure 11
W669-2 C WHEEL CONTOUR ACCEPTANCE GAGE
FOR AAR 1-B NARROW & WIDE FLANGE
W669-5   A MASTER GAGE FOR W669-2
W669-6 C CONTOUR GAGE FOR APTA CONTOUR 140M
W669-8 A MASTER GAGE FOR W669-6
W669-11 C WMATA CONTOUR ACCEPTANCE GAGE
W669-12 B MASTER GAGE FOR W669-11
W670 B AAR  1B  NARROW  FLANGE CONTOUR GAGE (MALE)1 IN 20 TAPER  MSRP G Figure 12
W671 D AAR  1B  NARROW  FLANGE CONTOUR GAGE (FEMALE)1 IN 20 TAPER  MSRP G Figure 12
W671-1 A 1B NARROW FLANGE WHEEL CONTOUR GAGE 1 IN 40 TAPER                       AAR MSRP G MANUAL Figure 11
W671-2 B 1B NARROW FLANGE WHEEL PROFILE ACCEPTANCE GAGE 1F IN 20 TAPER AAR MSRP G-II Figure 4.31C
W672 A COLUMN GIB GAGE ASF T-11 TRUCK BOLSTER 100 TONAMERICAN STEEL FOUNDRIES DRAWING 1-8239
W676 B E-COUPLER CONTOUR CONDEMNING LIMIT  & E-COUPLER SECOND HAND GAGE # 25623-1  (BOTH SIDES)
W677 C F-COUPLER  GUARD  ARM  DISTORTION  GAGE  36527-3
W678 C CEILING WEAR GAGE  AAR FIELD MANUAL RULE 48SPECIFICATION M-214 FIGURE 2  EC-1200
W679 E ASSEMBLED TRUCK GAGE  70 & 100 TON RIDE CONTROLAAR FIELD MANUAL RULE 88
W679-1 A ASSEMBLED TRUCK GAGE  70 & 100 TON RIDE CONTROLCSX DRAWING L0626964
W680 B ASSEMBLED TRUCK GAGE SUPER SERVICE RIDE CONTROL TRUCK    AAR FIELD MANUAL RULE 88  Figure A-1
W681 C F-COUPLER CONTOUR LIMIT GAGE  #47120-2
W682 E WHEEL BACK-TO-BACK SERVICE LIMIT GAGEMSRP  G-II  Figure 5.27
W682-1 A NEC-MSC BACK-TO-BACK SERVICE LIMIT GAGE
W682-2 A BACK-TO-BACK SERVICE LIMIT GAGE
53.1875 GO DIMENSION     53.250 NO-GO DIMENSION
PER EMD LOCOMOTIVE SPECIFICATION
W683 A BOLSTER CENTER BOWEL GAGE FOR NEW BOLSTERSEC-1109 (ALTERNATE)
W684 C INSIDE BUTT CORNER GAGE # 49371
W685 B E &  F  COUPLER YOKE GAGE  NO. 49372
W686 A E & F COUPLER YOKE GAGE NO. 49373
W687 A E & F COUPLER YOKE GAGE NO. 49373-2
W688 B E/F & F COUPLER SHANK HEIGHT GAGE NO. 49775-1
W689 B E/F & F COUPLER HEIGHT GAGE NO. 49775-2
W690 B E/F & F COUPLER BUTT WIDTH GAGE NO. 49775-3
W691 C E COUPLER KEY SLOT LOCATION GAGE NO. 49775-4
W692 B E COUPLER SHANK HEIGHT GAGE NO. 49775-5
W693 A E/F & F COUPLER SHANK HEIGHT GAGE NO. 49775-6
W694 C KING PIN LOCKING JAW NO-GO GAGEAAR  MSRP H-III  Figure 5.7
W698 D RAIL WEAR GAGE  FOR 141, 136, 133, 132, 119, 115 & 112 POUND RAIL
W698-1 A RAIL WEAR GAGE (TENTHS SCALE) FOR 141, 136, 133, 132, 119, 115, & 112 POUND RAIL
W698-3 C RAIL WEAR GAGE ( METRIC SCALE) FOR 141, 136, 133, 132, 119, 115, & 112 POUND RAIL
W698-5 A RAIL WEAR GAGE (METRIC SCALE) FOR 90, 100, & 110 POUND RAIL
W698-6 A RAIL WEAR GAGE FOR 90, 100, & 110 POUND RAIL
W698D1 A MASTER GAGE FOR W698
W700 B BARBER STABILIZER WEAR GAGE  SK-1546-1
STANDARD CAR TRUCK DRAWING  SK-1546 REV H
W701 B BARBER STABILIZER WEAR GAGE SK-1546-2
STANDARD CAR TRUCK DRAWING SK-1546 REV H
W703 B DRAFT GEAR FOLLOWER FLATNESS CONDITION GAGE NO.  34643-3
MCSCM   DRAWING NUMBER 49779 REV A
W704 A E KNUCKLE NOSE WEAR & STRETCH GAGE NO. 24992-A
W705 A GAGE NO. 24992-1
W706 A GAGE NO. 25005-D
W707   GAGE NO. 25098-1 (NO DRAWING)
W709 B AAR TIGHTLOCK COUPLER CONTOUR CONDEMNING LIMIT GAGENO. 34100-1
W710 B TIGHTLOCK COUPLERS KNUCKLE NOSE WEAR AND STRETCH LIMIT GAGE NO. 34100-2A
W711 C TIGHTLOCK COUPLERS ALIGNING WING RECLAMATION GAGE NO.  34101-2
W714   GAGE NO. 34647-5 (NO DRAWING)
W715   A GAGE NO. 43556-1A
W716   SECOND HAND ACCEPTANCE GAGE
MCSC DRAWING 44246  GAGE NUMBER 44246-1
W717   GAGE NO. 44246-2 (NO DRAWING)
W718   GAGE NO.  44246-4  (NO DRAWING)
W719   GAGE NO.  44249-1A  (NO DRAWING)
W721 B WIDE FLANGE CONTOUR (FEMALE) Prior 1B  1 IN 40 TAPER
W722 B GAGE NO. 44250-6
W723   GAGE NO. 44250-8  (NO DRAWING)
W724 A KNUCKLE LOCK ENGAGEMENT SURFACE GAGE NO.  44252-1A
W725   GAGE NO.  44252-2  (NO DRAWING)
W726   GAGE NO.  44252-3  (NO DRAWING)
W728 B GAGE NO.  49353
W729 B CONDEMNING LIMIT GAGE NO. 49355
W730 B E/F & F COUPLER SECOND HAND ACCEPTANCE SHANK BUTT HEIGHT GAGE NO.  49360
W732 A E, E/F & F RECONDITIONED ACCEPTANCE
PIN PROTECTOR CONTOUR GAGE
GAGE NUMBER 49362
W733 A E, E/F OR F COUPLER SECOND HAND ACCEPTANCE KNUCKLE HUB HEIGHT GAGE  NO.  49363
W734 C GAGE NO 49364-B
W735 A LOCK THICKNESS & CONCAVITY GAGE NO.  49365
W736 A LOCK THICKNESS & CONCAVITY GAGE  NO.  49366
W737 A E, E/F & F COUPLER RECOND, ACCEPTANCE, LOCK , THICKNESS GAGE NO. 49367
W738 A E, E/F & F COUPLER RECOND, ACCEPTANCE, LOCK , THICKNESS GAGE NO. 49367-1
W739 B KNUCKLE PIVOT PIN HEAD HEIGHT, HEAD DIA & SHANK DIA GAGE NO. 49369
W740   GAGE NO. 49376  (NO DRAWING)
W741 A GAGE NO. 50051-1
W743 A FOR SOLID BUTT COUPLER GAGE NO. 50051-3
W744 A GAGE NO. 34101-5A
W745 A SHANK BUTT TOP GAGE
MCSCR DRAWING 50052  GAGE NUMBER 50052-1
W746 B TIGHTLOCK COUPLERS ALIGNING WING RECLAMATION GAGE NO.  34101-1
W747 A TYPE F RECONDITIONED COUPLER GAGE NO. 44248-1
W748 A E/F & F SECOND HAND & RECONDITIONED ACCEPTANCE SHANK LENGTH GAGE NO. 44248-3B  MCSCM Drawing 44248 Rev E
W749 A F COUPLER SECOND HAND & RECONDITIONED ACCEPTANCE SHANK LENGTH GAGE NO. 44248-2C  ASF 44248 Rev E
W750 A ALIGNING WING LIMIT GAGE NO. 32600
W751   Starrett 6 Foot Scale
W752   Gage No. 49370  (NO DRAWING)
W753 A AAR MSRP G-II Figure 5.5  AXLE CENTERING GAGE
W754 A AAR MSPR G-II Figure 5.5GAGE FOR LOCATING FIRST WHEEL (FREIGHT)
W754-1 D GAGE FOR LOCATING FIRST WHEEL 26.547 INCHES
W755 B AAR MSRP G-II Figure 5.5GAGE FOR LOCATING FIRST WHEEL (AMTRAK)
W755-2 A GAGE FOR LOCATING FIRST WHEEL 26.657 INCHES
W758 B WHEEL DEFECT GAGE (OLD STYLE)  304 Stainless
W759 F BODY CENTER PLATE GAGE  AAR MSRP C  Standard S-211-78SEE GAGE W904 FOR USED EQUIPMENT
W758-1 E AMTRAK WHEEL DEFECT GAGE
W760 A ALIGNMENT SHOULDER GAGE NO. 50051-2
W761 A LATERAL GAGE  (3/32 TO 1 1/2 )
W762 B SIDE FRAME PAIRING GAGE EC-1107-1AAR MSRP D Figure 2, Figure 2a and Figure 2b
W763   AAR MSRP D  Standard S-362-79 NO GO GAGE FOR BRAKE SHOEDIMENSIONS DO NOT AGREE CANNOT DRAW
W764 J BARBER® BOLSTER GIB RESTORATION GAGE SK-1504 REV M
W765 D BARBER® DUAL BOLSTER POCKET RESTORATION GAGE SK-1689
W766 D ASF I-7927  37 1/2 DEGREE ANGLE SURFACE CONTOUR GAGE FOR ASF RIDE CONTROL® AND SUPER SERVICE® RIDE CONTROL® TRUCK BOLSTERS 70, 100 & 125 TON
W767-1 A SPLIT WEDGE BOLSTER POCKET CONSTRUCTION GAGEBARBER® SK-699PENNSY DRAWING PN 1201MODEL RA  70 & 100 S-2-A, B, & C
W767-2 C PENNSY DRAWING 1201  RETROFIT TEMPLATEMODEL RAD3  70 & 100 S-2-A (609)
W767-3 B PENNSY DRAWING PN 1201  RETROFIT TEMPLATEMODEL RA50 BOLSTER 50
W767-4 A PENNSY DRAWING PN 1201  RETROFIT TEMPLATEMODEL RA50A  BOLSTER 50
W767-5 A PENNSY DRAWING PN 1201  RETROFIT TEMPLATEMODEL RAD3  70 & 100 S-2-A (609)
W768 B CENTER PLATE NO GO GAGE FOR NEW BOLSTERSFor M-214 REQUIREMENTS SEE W880, W882 & W883
W769   JOURNAL LENGTH GAGE AAR MSRP G RP-625-65NO LONGER IN THE G MANUAL (OBSOLETE ???)
W770-1 C PENNSY CORP DRAWING PN 1201MODEL RB BOLSTER 70 & 100 TON S-2-A, B &CBARBER DRAWING SK-2013
W770-2 B PENNSY CORP DRAWING PN 1201MODEL RB50  BOLSTER 50
W770-3 B PENNSY CORP DRAWING PN 1201MODEL RB50A  BOLSTER 50
W770-4 B PENNSY CORP DRAWING PN 1201MODEL RB50B  BOLSTER 70 S-2-B LOW LEVEL
W770-5 B PENNSY CORP DRAWING PN 1201MODEL RBDB  BOLSTER 70 & 100 S-2-A(609)
W771 B ASF DRAWING 1-8243  COLUMN LAND SURFACE GAGE FORT-11 TRUCK BOLSTER 100 TON CAPACITY
W772 A ASF DRAWING 1-8239 COLUMN GIB GAGE FORT-11 TRUCK BOLSTER 100 TON CAPACITY
W774 A ASF DRAWING 1-8249  COLUMN GAGE100 TON  T-11 TRUCK SIDE FRAME
W775 A ASF DRAWING 1-8117  INNER COLUMN ROTATIONAL STOP GIB GAGE FOR 70 TON RIDE CONTROL® TRUCK BOLSTER
W776 A ASF DRAWING 1-8119  INNER COLUMN ROTATIONAL STOP GIB GAGE FOR 70 TON LOW LEVEL TRUCK BOLSTER
W778 A ASF DRAWING 1-8118  INNER COLUMN ROTATIONAL STOP GIB GAGE FOR 100 & 125 TON GR C RIDE CONTROL® TRUCK BOLSTER
W779-1 A ASF  RIDE CONTROL®  DISTANCE BETWEEN SLOPED SURFACES100 TON  7 & 8 COIL SPRING GROUP
W779-2 A ASF  RIDE CONTROL®  DISTANCE BETWEEN SLOPED SURFACES100 TON  9 COIL SPRING GROUP
W779-3 A ASF  100 TON SUPER SERVICE  RIDE CONTROL®DISTANCE BETWEEN SLOPED SURFACES GAGE
W779-4 A ASF  RIDE CONTROL®  DISTANCE BETWEEN SLOPED SURFACES70 TON
W780 H STANDARD CAR TRUCK CO. DRAWING SK-1504 REV M
(SK-1671 OBSOLETE)   GAGE FOR BOLSTER GIB RESTORATION
W781 B ASF GIB RESTORATIONS GAGES (PRE 1987 CASTINGS)ASF DRAWING 1-8982
W783 E Back-to-Back Mounting Gage for All Steel WheelsAAR MSRP G-II Figure 5.4  (IMPROVED BY WINCHESTER)
W784 J “U” DIMENSION GAGE      AAR G-II  Figure 5.21
W784-W F “U” DIMENSION GAGE FOR MOUNTED WHEELS
W785A B AAR STANDARD S-629-98  MASTER GAGE FOR WHEEL GAGES
W785-1A A AMTRAK MASTER GAGE FOR VERIFYING W620-3 & W620-4
W785-2A A MASTER GAGE FOR W758-1
W788 B BODY CENTER PLATE GAGE FOR NEW CENTER PLATESAMERICAN STEEL FOUNDRIES DRAWING 016339 REV P
W789 C BODY CENTER PLATE GAGE FOR OLD CENTER PLATESAAR MSRP SECTION C  STANDARD S-211-78
W790 A PENNSY DRAWING PN 1201 SPLIT WEDGE WELD GAGE
W790-2 B STANDARD CAR TRUCK DRAWING SK-2014 (REPLACES SK-701)
W791-X   NO LONGER AVAILABLE
W792-1 B WHEEL & COUPLER GAGE (OVERSIZED WHEELS)
CANADIAN NATIONAL RR DRAWING 3H-34556 REV E
W793 C EC-1127  CENTER PLATE NO-GO GAGE FOR NEW CASTINGSM-214  GAGE FOR USED CASTINGS SEE  W883
W794 C EC-1087  RADIUS GAGE FOR THRUST LUG AND JAW FACEFOR NARROW PEDESTAL SIDE FRAMES
W795 A CAP SCREW GAGE   AAR MSRP H-II  Figure 3.18
W796 A GAGE FOR CHECKING COMBINED WEAR OF ASSEMBLED RIDE CONTROL®TRUCK ELEMENTS FOR 37 1/2 DEGREE INVERTED BOLSTER POCKETS  ASF DRAWING 2-8114-G
W798-1 G NO-GO GAGE SK-1482A LOWER FOR  S-2-HD BOLSTER POCKETS SIDEWALL RESTORATIONSTANDARD CAR TRUCK CO  DRAWING SK-1482 REV F
W798-2 B NO-GO GAGE SK-1482A UPPER FOR  S-2-HD BOLSTER POCKETSSTANDARD CAR TRUCK CO  DRAWING SK-1482 REV F
W799-1 G BARBER® RESTORATION GAGE SK-1483A – LOWER
STANDARD CAR TRUCK DRAWING SK-1483 REV F
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-3)
W799-2 C BARBER® RESTORATION GAGE SK-1483A – UPPER
STANDARD CAR TRUCK DRAWING SK-1483 REV F
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-3)
W800 D SIDE FRAME COLUMN RESTORATION GAGE FOR S-2-HDSTANDARD CAR TRUCK DRAWING SK-1432 REV G
W801-1 C SIDE FRAME COLUMN RESTORATION GAGE SK-1503-4STANDARD CAR TRUCK DRAWING SK-1503 REV J
W801-2 B SIDE FRAME COLUMN RESTORATION GAGE SK-1503-1STANDARD CAR TRUCK DRAWING SK-1503 REV J
W801-3 C SIDE FRAME COLUMN RESTORATION GAGE SK-1503-7
STANDARD CAR TRUCK DRAWING SK-1503 REV J
W802 B BARBER® STABILIZER GAGE SK-1546-3
STANDARD CAR TRUCK DRAWING SK-1546 REV H
W803 B BARBER® STABILIZER GAGE  SK-1546-4
STANDARD CAR TRUCK DRAWING SK-1546 REV H
W804 A SIMPLIFIED WHEEL GAGE WITH SCALE
W805 A 3 INCH RADIUS STANDARD
W806 C AAR TIGHTLOCK COUPLER GAGE 31000
W807 A BOLSTER CENTER BOWL GAGE EC-1126 FOR NEW CASTINGS
W808 A ARTICULATED CONNECTOR GAGE  RETAINING COLLAR RESTORATION
TTX DRAWING B-12675 REV B
W810 A BOLSTER BOWL GAGE
TTX DRAWING B-10737 REV D
W811 A  ARTICULATED CONNECTOR GAGE
TTX DRAWING B-11871
W812 C 4 INCH BOTTOM OUTLET GAGEGAGE E18.6 & E18.7 COMBINED
W813 B 6 INCH BOTTOM OUTLET GAGEGAGES  E18.8 & E18.7 COMBINED
W814-1 B BARBER® LOWER RESTORATION GAGE SK-1781
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-2)
W814-2 B BARBER® UPPER RESTORATION GAGE SK-1781
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-2)
W816 B BARBER® STABILIZER WEAR GAGE  SK-1546-5
STANDARD CAR TRUCK DRAWING  SK-1546 REV H
W817 B BARBER® STABILIZER WEAR GAGE  SK-1546-6
STANDARD CAR TRUCK DRAWING SK-1546 REV H
W818  D THRUST LUG GAGE  CIRCULAR LETTER C-10441 & C-10391
AAR MSRP Section D   Standard S-625
W819-1 A NATIONAL SUPER C-1 TRUCK SIDE FRAME ALL DEFLECTIONS SIDE DAMPING CONTROL WEAR INDICATOR 6 X 11 JOURNALS  ASF DRAWING N51548 REV A
W819-2 A NATIONAL SUPER C-1 TRUCK SIDE FRAME ALL DEFLECTIONS DAMPING CONTROL WEAR INDICATOR 6 1/2 X 12 JOURNALS ASF DRAWING N51549 REV A
W819-3 A NATIONAL SUPER C-1  WEDGELOCK TRUCK SIDE FRAME ALL DEFLECTIONS DAMPING CONTROL WEAR INDICATOR 6X11 JOURNALS
ASF DRAWING N51550 REV A
W819-4 A NATIONAL SUPER C-1 WEDGELOCK TRUCK LOW DECK SIDE FRAME DAMPING CONTROL WEAR INDICATOR 6X11 JOURNALS ASF DRAWING N51551 REV A
W819-5 A NATIONAL SUPER C-1 WEDGELOCK TRUCK SIDE FRAME DAMPING CONTROLS WEAR INDICATOR 6 1/2 X 12 JOURNALS ASF DRAWING N51552 REV A
W819-6 A NATIONAL SUPER C-1 WEDGELOCK TRUCK SIDE FRAME DAMPING CONTROL WEAR INDICATOR 6 1/2 X 12 JOURNALS ASF DRAWING N51553 REV A
W820    
W821    
W823 C AAR FIELD MANUAL RULE 50  TRUCK SPRING LIMIT WEAR GAGE
W828-1 C BARBER® SIDE FRAME COLUMN RESTORATION GAGE SK-1560-1
STANDARD CAR TRUCK DRAWING SK-1560 REV A
W828-2 C BARBER® SIDE FRAME COLUMN RESTORATION GAGE SK-1560-2
STANDARD CAR TRUCK DRAWING SK-1560 REV A
W829 C FROG GAGE PLAN NO. 790-94 & 790-94
W830  A 37 1/2 DEGREE SURFACE CONTOUR GAGE FOR 40 & 50 TON ALSO 55 TON
LOW LEVEL A.S.F. RIDE CONTROL TRUCK BOLSTERS GAGE #1-7329
W830-1 A WINGED CLEARANCE GAGE FOR CHECKING MINIMUM OPENING FOR REPAIRED A.S.F. RIDE CONTROL TRUCK BOLSTERS 40 & 50 TON ALSO 55 TON LOW LEVEL GAGE NUMBER 1-8116
W830-2 A INNER COLUMN ROTATION STOP GIB GAGE FOR A.S.F. RIDE CONTROL TRUCKS 40 & 50 TON CAPACITY GAGE NUMBER 1-8103
W831  D PEDESTAL LUG SPACING GAGE
STANDARD CAR TRUCK DRAWING SK-1598 REV B
W832   EC-1090 KEY SLOT GAGERECOMMENDED ALTERNATE EC-1157 (W849)
W833   JOURNAL LENGTH GAGE  AAR G-II  FIGURE 5.26  Rule 5.3
W834 A WHEEL OUT OF ROUND CONDITION GAGE
W838 B HOLLOW TREAD NO-GO GAGE
TTX DRAWING 14677 REV E
W839 A NCR PROFILE CONTOUR GAGE DTC WHEELS
ORX DRAWING 03229-84-701  REV P
W841 E RIDE CONTROL® & SUPER SERVICE RIDE CONTROL® TRUCK BOLSTER POCKETS 70, 100 & 125 TONCONSTRUCTION POINT GAGE 1-8985
W842-1 A RIDE MASTER® SHOE HEIGHT GAGE  1-8881
W842-2 C RIDE CONTROL® SHOE HEIGHT GAGE 70 , 100 & 125 TON
1-8737 LINE 1,2,3 & 5
W842-3 A BARBER S-2 SHOE HEIGHT GAGE
BARBER MAINTENANCE MANUAL PAGE 6-9 REV 5/95
W842-4 A UNION PACIFIC 2 SCALE SHOE HEIGHT GAGE
W842-5 A SUPER SERVICE RIDEMASTER SHOE HEIGHT GAGE 1-9199
W842-6 A 70 TON LOW LEVEL RIDE CONTROL TRUCK 5′-1″ WHEELBASE
ASF DRAWING 1-8737 LINE 4
W842-7 A 50 TON RIDE CONTROL SHOE HEIGHT GAGE  5 1/2 X 10
AMSTEDMAXION TRUCKS ONLY
W843 A WORK POINT GO GAGE BARBER®  S-2  BOLSTERS  SK-1591
W844 B WORK POINT NO-GO GAGE BARBER® S-2 BOLSTERS  SK-1590
W845 A 41º CONTOUR GAGE FOR ASF T-II TRUCK  BOLSTER 100 TON CAPACITY
ASF DRAWING 1-8234 REV D
W846 A AMTK-NRCC WHEEL PROFILE
W846-1 A AMTK-NRCC WHEEL PROFILE
W846-2 A AMTK-NRCC WHEEL PROFILE MASTER
W848 B ADAPTER WEAR GAGE
MRSP SECTION H  ALTERNATE STANDARD S-706-76
W849 C EC-1157
W850 A WHEEL OVERHEATED GAGE  RP-629-80
W851 E OUTER GIB CONTOUR GAGE RIDE CONTROL® & SUPER RIDE CONTROL® TRUCK BOLSTERS 70, 100 & 125 TON  1-8988 REV B
W852 D COLUMN LAND SURFACE GAGE FOR CERTAIN BOLSTERS ONLYASF DRAWING   1-8987
W853 D SIDE FRAME COLUMN  GO GAGE  EC-1120  ASF DRAWING 1-8990
W854 G SIDE FRAME COLUMN NO-GO GAGE EC-1121  ASF  1-8991
W855 C INNER COLUMN ROTATION STOP GIB GAGE FOR RIDE CONTROL® & SUPER SERVICE RIDE CONTROL TRUCK® BOLSTERS 70, 100 & 125 TON  ASF DRAWING 1-8986
W856 E WINGED CLEARANCE GAGE FOR CHECKING MINIMUM OPENING FOR REPAIRED SUPER SERVICE® & RIDE CONTROL TRUCK® BOLSTERS 70, 100 & 125 TON GRADE “C”  ASF DRAWING 1-8062
SUPER SERVICE RIDEMASTER®    ASF DRAWING 1-9202
W857 D SIDE FRAME COLUMN GAGE  ASF DRAWING 1-8989
W858 C ROTATION STOP “GO” GAGE FOR RIDE CONTROL® & SUPER SERVICE RIDE CONTROL® SIDE FRAMES 70, 100 & 125 TON   1-8992
W859 D CONSTRUCTION POINT GAGE FOR RIDE CONTROL® & SUPER SERVICE RIDE CONTROL® TRUCK BOLSTER POCKETS WITH SLOPE SURFACE WEAR PLATES 70, 100 & 125 TON  1-9025
W860 B CONSTRUCTION POINT GAGE FOR RIDE CONTROL® LOW LEVEL5′-1″ WHEELBASE TRUCK BOLSTER POCKETS 70 TON  1-9031
W861  D GAGE FOR MEASURING MAXIMUM ALLOWED JOURNAL LENGTH FOR SECOND
HAND AND RECONDITIONED E, F, & K AXLES MRSP G-II  Figure 5.26
W862 H BOLSTER GIB RESTORATION GAGE FOR RIDE CONTROL® & SUPER SERVICE RIDE CONTROL® BOLSTERS 70, 100 & 125 TON  1-8982
W864 A GAGE 44247-1
W865 A GAGE 43062-1A TYPE F INTERLOCKING COUPLER SECOND HAND AND RECONDITIONED ACCEPTANCE GAGE ALIGNING WING DISTORTION AND SEPARABLE POCKET  DRAWING 43062 REV D
W866    
W867 A E/F & F COUPLERS GAGE FOR RECONDITIONED SHANK BUTT TOPDRAWING 50052   GAGE #  44250-2A
W869 A F COUPLER HEAD PIN PROTECTOR & BUFFING SHOULDER GAGE
MCSC DRAWING 49353  GAGE # 49361
W871 A SIDE FRAME WEAR PLATE GAGE
W872 A TRANSVERSE ROOF FLATNESS GAGE FOR NARROW PEDESTAL SIDE FRAMES DRAWING EC-1086 REV C
W873 B LONGITUDINAL ROOF FLATNESS GAGE  EC-1089 & EC-1100
W874 A BRAKE HEAD GO GAGE
STANDARD CAR TRUCK CO DRAWING SK-2327 REV A
W875    
W876    
W877 A CONCRETE TIE WEAR GAGE
W879    
W880 H BOLSTER DEPTH “GO” & “NO-GO” GAGE  MRSP D MANUAL  M-214 THE DIAMETER OF THE RECONDITIONED CENTERPLATE BOWL TO COMPLY WITH THE REQUIREMENTS OF FIGURE VI, EC-1150 & EC-1154
W882 E BOLSTER SCRAP OR REWORK GAGEAAR MRSP D MANUAL M-214  4.3.2.1.1
W883 E CENTER BOWL DIAMETER “NO-GO” GAGEAAR MRSP D MANUAL M-214  3.3.2.2.1
W884 A BASIC SHIM SET  (1/32) (1/16) (3/32) (1/8) (5/32) (3/16) (1/4) (5/16) & (3/8)
W884-1 A BASIC SHIM SET (1/8) (1/4) (3/8) (1/2) 3/4)
W886   CIRCUMFERENCE MEASURE (TAPE) FOR 27 INCH TO 38 INCH STEEL & STEEL
TIRED WHEELS STANDARD S-612
W886-2 B CIRCUMFERENCE MEASURE (TAPE) FOR 27 INCH TO 45 INCH STEEL & STEEL
TIRED WHEELS STANDARD S-612
W887 A CIRCUMFERENCE MEASURE (TAPE) FOR 38 INCH TO 52 INCH STEEL & STEEL
TIRED WHEELS STANDARD S-613
W889 F LONGITUDINAL SQUARENESS GAGE  RP-321-91
W889-7   TAPER GAGE (.010 – .150) AND (.2 MM – 4 MM)
     
W890-2 B BRAKE BEAM POCKET GAGE EC-2036 REV C
W891 B NORFOLK SOUTHERN WHEEL CHAMFER GAGE
W892 D FRICTION CASTING CONDEMNING GAGESTANDARD CAR TRUCK CO.  DRAWING SK-1594 REV D
W893 E FRICTION CASTING CONDEMNING GAGESTANDARD CAR TRUCK CO. DRAWING SK-1595 REV E
W898 D MASTER GAGE FOR VERIFYING W641 (36527-2A) & W677 (36527-3)
W900 B 37 1/2 DEGREE ANGLE SURFACE CONTOUR GAGE FOR ASF RIDEMASTER®TRUCK BOLSTER 70 & 100 TONAMERICAN STEEL FOUNDRIES DRAWING 1-9002 REV A
W902 C COUPLER & AIR HOSE HEIGHT GAGE
W903    
W904 C BODY CENTER PLATE WEAR LIMIT GAGEFIELD MANUAL RULE  60
W905 B SK-7417 CONTOUR WEAR LIMIT GAGE TO CHECK FOR EXCESSIVE
CONTOUR SLACK
W906 E SIDE BEARING CLEARANCE GAGE (1/16 TO 13/16)
TTX DRAWING B-11411 REV A
W906-4 A TRUCK STEP GAGE
TTX DRAWING B-11457 REV C
W907    
W909-1 B THRUST LUG WIDTH “NO-GO” GAGE NARROW PEDESTAL SIDE FRAMES( 4 1/4 X 8 JOURNAL)  TEMC DRAWING EC-1088 REV D
W909-2 B THRUST LUG WIDTH “NO-GO” GAGE NARROW PEDESTAL SIDE FRAMES( 5 X 9 & 5 1/2 X 10 JOURNALS)  TEMC DRAWING EC-1088 REV D
W909-3 B THRUST LUG WIDTH “NO-GO” GAGE NARROW PEDESTAL SIDE FRAMES( 6 X 11 JOURNALS)  TEMC DRAWING EC-1088 REV D
W909-4   THRUST LUG WIDTH “NO-GO” GAGE NARROW PEDESTAL SIDE FRAMES( 6 1/2 X 12  JOURNALS)  TEMC DRAWING EC-1088 REV D
W910    
W913 A BARBER® SPRING WEAR LIMIT GAGE
W913-1 A BARBER® SPRING WEAR LIMIT GAGE  FOR S-2-HD DUAL RATE TRUCKS
W914 A CONSTRUCTION POINT GAGE A.S.F. RIDEMASTER® TRUCK BOLSTERAMERICAN STEEL FOUNDRIES DRAWING 1-9004
W915    
W916  A BRINELL WIDTH & SPALL LIMIT GAGE
AAR H-II  Figure 1.5
W917 A COLUMN GIB GAGE  ASF RIDEMASTER® 70 & 100 TON RIDE
AMERICAN STEEL FOUNDRIES DRAWING 1-8999
W918 A COLUMN OUTER LAND SURFACE GAGE ASF RIDEMASTER® TRUCK BOLSTER   AMERICAN STEEL FOUNDRIES DRAWING 1-8997
W919 A COLUMN INNER LAND SURFACE GAGE  ASF RIDEMASTER® TRUCK BOLSTERS  AMERICAN STEEL FOUNDRIES DRAWING 1-8998
W920-2 B OUTER GIB CONTOUR GAGE FOR ASF RIDEMASTER® TRUCK BOLSTERAMERICAN STEEL FOUNDRIES DRAWING 1-9007
W921 A SIDE FRAME COLUMN GAGE FOR ASF 70 & 100 TON RIDEMASTER®
AMERICAN STEEL FOUNDRIES DRAWINGS 1-9011
W922 B COLUMN “GO” GAGE FOR ASF RIDEMASTER SIDE® FRAMES
AMERICAN STEEL FOUNDRIES DRAWING 1-8995
W923 C COLUMN “NO-GO” GAGE FOR ASF RIDEMASTER® SIDE FRAMESAMERICAN STEEL FOUNDRIES DRAWING 1-8994
W924 B SPRING WEAR LIMIT GAGE ASF RIDEMASTER® CONTROL SPRINGSAMERICAN STEEL FOUNDRIES DRAWING 1-9000
W925 A HEIGHT WEAR LIMIT GAGE BUTT END (ROTARY DUMP COUPLER)AMERICAN STEEL FOUNDRY DRAWING 015487 REV B
W926 A FRONT FOLLOWER BACK FACE CONDEMNING LIMIT GAGE (ROTARY DUMP COUPLER)  AMERICAN STEEL FOUNDRIES DRAWING 015505 REV A
W927 A CONDEMNING LIMIT GAGE FOR FRONT FOLLOWER (ROTATY DUMP COUPLER)  AMERICAN STEEL FOUNDRIES DRAWING 015504 REV A
W928 A YOKE HEAD-TOP INNER SURFACE WORN LIMIT GAGE (ROTARY DUMP COUPLER)  AMERICAN STEEL FOUNDRIES DRAWING 015501 REV A
W929 A YOKE HEAD-TOP INNER SURFACE RECLAMATION GAGE (ROTARY DUMP COUPLER) ASF DRAWING 015502
W930 A YOKE SPHERICAL SURFACE INSPECTION GAGE (ROTARY DUMP COUPLER) ASF DRAWING 016188 REV A
W931 A COUPLER BUTT END TOP SURFACE – RECLAMATION GAGE (ROTARY DUMP COUPLER)  ASF DRAWING 015495 REV A
W932-1 C BUTT END SPHERICAL SURFACE (ROTARY DUMP COUPLER) INSPECTION GAGE NO. 016176-2  ASF DRAWING 016176 REV C
W932-2 C BUTT END SPHERICAL SURFACE (ROTARY DUMP COUPLER) INSPECTION GAGE NO. 016176-1  ASF DRAWING 016176 REV C
W933 A POCKET CONTOUR GAGE ASF RIDEMASTER BOLSTERS 70 & 100 TONAMERICAN STEEL FOUNDRIES  DRAWING 1-9003
W934 A TYPE F ROTARY SHANK COUPLER SHANK BUTT VERTICAL HEIGHT CONDEMNING GAGE NO.  47986-1  ABC NACO DRAWING 47986PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W935 A TYPE F ROTATY INTERLOCKING COUPLER NON PIN BEARING BLOCK DESIGN SHANK BUTT THICKNESS CONDEMNING GAGEABC NACO DRAWING  49927PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W936-1 A GAGE FOR CHECKING COMBINED WEAR OF ASSEMBLED CONTROL               ELEMENTS 70 & 100 TON RIDE MASTER®  ASF DRAWING 1-9009
W936-2 A GAGE FOR CHECKING COMBINED WEAR OF ASSEMBLED CONTROL ELEMENTS SPECIAL WITH SLOPEGARD SHOES 1992 PRODUCTION ONLYAMERICAN STEEL FOUNDRIES DRAWING 1-9009
W936-3 A GAGE FOR CHECKING COMBINED WEAR OF ASSEMBLED CONTROL               ELEMENTS OF SUPER SERVICE RIDE MASTER®  ASF DRAWING 1-9198
W937-1 A LOWER NO-GO GAGE S-2-HD BOLSTER AS CAST POCKET SPLIT WEDGE APPLICATIONS  STANDARD CAR TRUCK CO. DRAWING SK-1901
W937-2 A UPPER NO-GO GAGE S-2-HD BOLSTER AS CAST POCKET SPLIT WEDGE APPLICATIONS  STANDARD CAR TRUCK CO. DRAWING SK-1901
W938-1 B LOWER RESTORATION GAGE S-2-HD BOLSTER POCKET AS CAST POCKET SPLIT WEDGE APPLICATIONSSTANDARD CAR TRUCK CO.  DRAWING SK-1902
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-3)
W938-2 B UPPER RESTORATION GAGE S-2-HD BOLSTER POCKET AS CAST POCKET SPLIT WEDGE APPLICATIONSSTANDARD CAR TRUCK CO.  DRAWING SK-1902
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-3)
W939 A SIDE BEARING GAGEAAR MSRP D M-210 Figure 29A  CIRCULAR LETTER C-8670
W940 A DISC BRAKE THICKNESS GAGEBASED ON WABC DRAWING 0692590
W940-1 B DISC THICKNESS GAGE
W940-3 B DISC THICKNESS GAGE  VIA RAIL  94 MM CONDEMNING LIMIT
W945 C TRUCK SPRING GAGECSXT DRAWING L0626961
W946 A TMEC  NO-GO GAGE FOR WIDTH OF ROOF PEDESTAL SIDE FRAME7 X 12 JOURNALS   EC-1103
W948 A GAGE FOR END OF HANGERLESS TYPE BRAKE BEAMSTANDARD S-360-79  AAR MSRP D Figure 14
W949    
W951 A  
W952 A FROG SETTING GAGE
W953 B TEMC LONGITUDINAL ROOF FLATNESS GAGE FOR PEDESTAL SIDE FRAMES DRAWING EC-1100 REV B
W954 A ASF ARTICULATED CONNECTION CONDEMNING GAGE NO. 016767
W955 B TRANSFER SCALE
W956 A COUPLER SHANK LIMIT GAGE Figure 26
W957 A CYLINDRICAL TREAD CONTOUR FOR NARROW FLANGE WHEELSAAR MRSP G MANUAL ALTERNATE STANDARD S-622-78
W961 A THREAD GAGE 7/8 – 9 UNC CLASS 2A MAJOR DIAMETER VERIFICATIONINTERNATIONAL FASTENERS INSTITUTE, CLEVELAND, OHIO
W961-1 A THREAD GAGE 3/4 – 10 UNC CLASS 2A MAJOR DIAMETER VERIFICATION
INTERNATIONAL FASTENERS INSTITUTE, CLEVELAND, OHIO
W961-2 A THREAD GAGE 1 – 8 UNC CLASS 2A MAJOR DIAMETER VERIFICATION
INTERNATIONAL FASTENERS INSTITUTE, CLEVELAND, OHIO
W961-3 A THREAD GAGE 1 1/8 – 7 UNC CLASS 2A MAJOR DIAMETER VERIFICATION
MACHINERY’S HANDBOOK UNIFIED SCREW THREADS
MAJOR DIAMETER (MIN./MAX.)
W961-4 A THREAD GAGE 7/8-9 UNC  CLASS 1A MAJOR DIAMETER VERIFICATION
MACHINERY’S HANDBOOK UNIFIED SCREW THREADS
MAJOR DIAMETER (MIN./MAX.)
W961-5 A THREAD GAGE 1-8 UNC CLASS 1A MAJOR DIAMETER VERIFICATION
MACHINERY’S HANDBOOK UNIFIED SCREW THREADS
MAJOR DIAMETER (MIN./MAX.)
W962 A U DIMENSION GAGE  CANADIAN NATIONAL
W962-1 E U DIMENSION GAGE CANADIAN NATIONAL
W963 A BOLSTER PREPARATION TEMPLATEPENNSY CORP DRAWING PN 1696
W964 A BOLSTER PREPARATION TEMPLATEPENNSY CORP DRAWING PN 1696
W965 A INSERT APPLICATION  TEMPLATEPENNSY CORP DRAWING PN 1696
W966 A INSERT APPLICATION  TEMPLATEPENNSY CORP DRAWING PN 1696
W967 C ELEVATION GAGE 915-SW SPLIT WEDGE INSERT SK-1754-1STANDARD CAR TRUCK CO DRAWING SK-1754 REV D
W967-1 A ELEVATION GAGE 915-SW SPLIT WEDGE INSERT SK-1754-2
STANDARD CAR TRUCK CO DRAWING SK-1754 REV D
W968 C WELD GAGE 915-SW SPLIT WEDGESTANDARD CAR TRUCK CO.  SK-1755 REV C
W969    
W970    
W971    
W972    
W973 C  
W974 A MINER SIDE BEARING GAGE  NO. 29417-B
W974-1 B 5 & 5 1/8 SIDE BEARING CLEARANCE GAGE
W974-2 A MINER SIDE BEARING GAGE  NO. 29417-B  4 7/8 & 5 1/4
W976 A POCKET RESTORATION GAGE (6 X 11 S-2-C)STANDARD CAR TRUCK CO. DRAWING SK-1766
W977 A ADAPTER MANUFACTURER’S ENGINEERS COMMITTEE DRAWING AM-45096 REV F  GAGE MUPDATED ACCORDING TO ADAPTER TAG MEETING APRIL 21, 1998
W978 A NATIONAL SWING MOTION SPRING GAGEABC-NACO CIRCULAR NO. 5075-D
W979 A TANK CAR DENT GAGE
W980-1 C SWING MOTION TRUCK BOLSTER END SIDES
RESTORATION ACCEPTANCE GAGE NO. 48468-1
ABC-NACO DRAWING 48468-1 REV A
W980-2 A SWING MOTION TRUCK BOLSTER END SIDES
RESTORATION ACCEPTANCE GAGE NO. 48468-2
ABC-NACO DRAWING 48468-1 REV A
W980-3 A SWING MOTION TRUCK BOLSTER END SIDES
RESTORATION ACCEPTANCE GAGE NO. 48468-3
ABC-NACO DRAWING 48468-1 REV A
W981 B ROCKER BEARING GAGE NO. 49706-1  ABC NACO DRAWING 49706 REV A
TTX DRAWING  B-10799 REV C
W982 C SWING MOTION SIDE FRAME COLUMN OPENING RESTORATION GAGE
ASF CIRCULAR N5075
W983 A SWING MOTION ASSEMBLED TRUCK GAGEABC – NACO DRAWING 51554 REV A
W984 A SWING MOTION ASSEMBLED TRUCK GAGEABC – NACO DRAWING 51555 REV A
W985 C SWING MOTION TRUCK ROCKER WEAR GAGEABC NACO DRAWING 51932  TTX DRAWING B-10801 REV C
W986  D SWING MOTION TRUCK ROCKER SEAT BEARINGS GAGE
ABC NACO DRAWING 51933  TTX DRAWING B-10800 REV A
W987   C WEDGE POCKET SLOPE SURFACE GAGE NO. 51436, 51436-2, & 51436-2
AMERICAN STEEL FOUNDRIES Circular N5075
W988-1 A NATIONAL SWING MOTION TRUCK SIDE FRAME PEDESTAL ROCKER SEAT CONDEMNING LIMIT GAGE 51437-1  ABC NACO DRAWING 51437PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W989-1 A NATIONAL SWING MOTION TRUCK (6 X 11)  ROCKER SEAT & ROCKER SEAT BEARING CONDEMNING LIMIT GAGE NO. 51433-1ABC NACO DRAWING 51433PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W989-2 A NATIONAL SWING MOTION TRUCK (6 1/2 X 12) ROCKER SEAT &  ROCKER SEAT BEARING CONDEMNING LIMIT GAGE NO. 51433-2ABC NACO DRAWING 51433PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W989-3 A NATIONAL SWING MOTION TRUCK (6 1/2 X 12) ROCKER SEAT &  ROCKER SEAT BEARING CONDEMNING LIMIT GAGE NO. 51433-2ABC NACO DRAWING 51433PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W990-1 A NATIONAL SWING MOTION BOLSTER LANDS CONDEMNING LIMIT GAGE NUMBER 51435-1   ABC NACO DRAWING 51435PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W990-2 A NATIONAL SWING MOTION BOLSTER LANDS CONDEMNING LIMIT GAGE NUMBER 51435-2   ABC NACO DRAWING 51435PERMISSION & VERIFICATION REQUIRED FROM ABC NACO
W991 A SIDEWALL RESTORATION GAGE
STANDARD CAR TRUCK DRAWING SK-2142REPLACES SK-2034, SK-1781, SK-1902, W995-1, W995-2, W814-1, W814-2, W938-1,W938-2
SK-2142  SUPERSEDED  BY SK-2546 REV B (W530)
W991 OBSOLETE BUT USABLE
W992-1 B NATIONAL SWING MOTION TRUCK SIDE FRAME COLUMN OPENING CONDEMNING GAGE 51432-1  MERIDIAN RAIL DRAWING 51432
W993 A CONTROL SPRING LIMIT GAGE (RIDE CONTROL®)ASF DRAWING 1-8417
W994 D CENTER PLATE RECONDITIONED GAGEAAR FIELD MANUAL RULE 60AAR MSRP SECTION C  STANDARDS S-210-78 & S-211-78
W995-1 B SIDE WALL RESTORATION GAGE S-2-A, S-2-B, & S-2-C BOLSTER POCKET SPLIT WEDGE APPLICATIONS   (UPPER RESTORATION)STANDARD CAR TRUCK DRAWING SK-2034
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-1)
W995-2 B SIDE WALL RESTORATION GAGE S-2-A, S-2-B, & S-2-C BOLSTER POCKET SPLIT WEDGE APPLICATIONS   (LOWER RESTORATION)STANDARD CAR TRUCK DRAWING SK-2034
DISCONTINUED USABLE   REPLACED BY SK-2142 (W991-1)
W996 A ELEVATION GAGE  955-SV INSERTSTANDARD CAR TRUCK CO.  DRAWING SK-2033
W997 A WELDING FIXTURE CLAMP FOR BOLSTER POCKET WEAR PLATES STANDARD CAR TRUCK CO.  DRAWING SK-1570
     
W999-1 B BOLSTER END SHOE GAGE (6 X 11) & (6 1/2 X 12) GAGE #48468-1
STANDARD CAR TRUCK COMPANY DRAWING 48468 REV A
W999-2 A BOLSTER END SHOE GAGE (6 X 11 LOW DECK) GAGE #48468-2
STANDARD CAR TRUCK COMPANY DRAWING 48468 REV A
W999-3 A BOLSTER END SHOE GAGE (7 X 12) GAGE #48468-3
STANDARD CAR TRUCK COMPANY DRAWING 48468 REV A
W1000    
W1001  A AAR 1B WIDE FLANGE LATHE TEMPLATE
W1002    
W1003    
W1004   A BRAKE LEVER NO-GO GAGE
W1005    
W1006 A GAUGE FOR MEASURING END CONDITION OF AAR TRUCK SPRINGS
AAR D MANUAL Fig. 6.1
W1007-2 A COLUMN FRICTION PLATE GAGE
AMERICAN STEEL FOUNDRIES DRAWING 51607 REV F
W1008 A INNER COLUMN ROTATION STOP GIB GAGE
AMERICAN STEEL FOUNDRIES DRAWING 1-8142
W1009 A COUPLER CONNECTING PIN NO-GO GAGE
TTX DRAWING A-6089 REV C
W1010    
W1011 A COLUMN WEAR PLATE GAGE #51934
AMERICAN STEEL FOUNDRIES CIRCULAR N5075
W1012    
W1013    
W1014    
W1015    
W1016    
W1017    
W1018    
W1019    
W1020    
W1021    
W1022    
W1023    
W1024    
W1025    
W1026    
W1027-1 A PASSENGER JOURNAL LENGTH GAGE MSRP G-II Fig. 4.2   CLASS D AXLE
JOURNAL SIZE 5 1/2 X 10
W1027-2 A PASSENGER JOURNAL LENGTH GAGE MSRP G-II Fig. 4.2  CLASS E AXLE
JOURNAL SIZE 6 X 11
W1027-3 A PASSENGER JOURNAL LENGTH GAGE MSRP G-II Fig. 4.2  CLASS F AXLE
JOURNAL SIZE 6 1/2 X 12
W1029 A WHEEL CONTOUR ACCEPTANCE GAGE
HEGENSCHEIDT PROFILE DRAWING 18108C01
     
W1031 A GIB RESTORATION GAGE BARBER STABILIZED TRUCK 125 TON S-2-HD
BARBER DRAWING SK-3011 NO REV GAGE NO. SK-30111
W1036 A WHEEL CONTOUR SR1-1A
W1036-1 A CONTOUR GAGE SR1-1A
W1036-3 A LATHE TEMPLATE SR1-1A
W1038 A TRUCK RIDE CONTROL BOLSTER SLOPE POCKETS GAGE
TTX DRAWING B-10570 REV C
W1047 A GO  NO-GO GAGE
TTX DRAWING B-10902 REV C
W1049 A BOLSTER GAGE
TTX DRAWING 16878 REV A
W1050 A 50 TON ASSEMBLED TRUCK GAGE 5 1/2 X 10
AMSTEDMAXION TRUCKS ONLY
W1051 A GAGE FOR RIDE CONTROL BOLSTER GIB RESTORATION  5 1/2 X 10
AMSTEDMAXION TRUCKS ONLY
W1053 C SIMPLIFIED STEEL WHEEL GAGE RAIL KING
W1054 D WHEEL DEFECT GAGE RAIL KING
W1055 B YOKE GO/NO-GO GAGE
AUTHORITY GREENBRIER
W1059 B YOKE DRAFT POCKET RESTORATION GAGE PER GREENBRIER
W1105 A NOTCHED STRAIGHT EDGE FOR CHECKING FROG POINT WEAR
W1108 A ROLLER BEARING PROBE S-723
W1109 A BOLSTER DEPTH GAGE WITH OUT LINER  AAR MSRP D  S-308
W1110 A BOLSTER DEPTH GAGE WITH LINER AAR MSRP  D  S-308
W1128 A WELDER’S GAGE  DRAWING NO. IRS-265 REV. A

 

[/su_spoiler]

Footer Sidebar 2

Quisque mattis molestie quam, ac ornare purus dapibus vel. Vestibulum sollicitudin tincidunt nibh eget pharetra. Donec interdum velit massa, tincidunt aliquam eros vestibulum eu. Sed imperdiet nisl vulputate justo lobortis posuere. Ut fermentum bibendum tortor eget tempor. Curabitur sed enim eu lorem pretium semper. Duis id dignissim magna.